Install Tip
*Note: For the current revision of SHO HPFPs, the kit does NOT come with an extra line.
- This kit is meant to attach to your OEM line, as seen below.
- You need our ECA Provisions Kit if you intend to add an ethanol sensor into your feed line.
- You can purchase that on this page, marked as the “ECA Provisions Kit” option.
Install Videos
HPFP Information
Maximum Rail Pressure
- OEM: 150 bar / 2,150 psi
- XDI-35: 180 bar / 2,600 psi
- XDI-EVO: 250 bar / 3,500 psi
- XDI-60: 260 bar / 3,600 psi
Mechanical Data
Geometric Volume
- OEM: 1.12 cc/rev
- XDI-35 / EVO: 1.52 cc/rev (+36% capacity)
- XDI-60: 1.83 cc/rev (+63% capacity)
- Fuel Compatibility: All known fuels, all ethanol blends
- Electric Connector: Bosch Compact 2-pin
- Driver Profile: XDI
- Accessories: Electric pigtail
- Maximum Flow Rate: TBC
- Housing Material: Stainless steel, hard coated aluminum
- Tuning Support: Standalone, SCT
- Dry Weight: 1112 g
Injector Information
Our XDI-manufactured and rigorously tested Direct Injection (DI) Injectors are specifically designed for the 2010–2019 Gen 1 3.5L EcoBoost series engines, delivering the precise fuel flow required for high-horsepower applications without auxiliary fuel systems. Each injector undergoes comprehensive testing at 100 bar and 200 bar on OEM-grade equipment at our XDI facility. We flow-match every set to within ±1% at both pressure levels, ensuring consistent accuracy and reliability.
- 1800cc, 40% Greater Flow than stock injectors
- OEM Spray Pattern for effective atomization
- OEM Idle Characteristics for smooth and stable idle
- Full Control and Diagnostics: No additional methanol injection, port fuel injection (PFI), extra ECUs, or wiring required
These injectors deliver pure power through optimized fueling, allowing for seamless performance in demanding applications.
Records List
