This combustion analyzer has specifically been designed for engine control and dyno monitoring applications. The design incorporates a data acquisition board with 8 high resolution inputs for pressure transducers or other inputs and 3 inputs for trigger signals (crankshaft hall, crankshaft VR, camshaft or encoder), all in a robust machined aluminum enclosure with mil-spec Deutsch ASU The analysis SW runs on every MS-Windows based PC or Tablet. For mobile use a preconfigured 10” Tablet is available on request. Speed Sensor Inputs: Transducer Inputs: Acquisition Rate: Sensor Type: Optimized for Fibre-Optic sensor type Housing Material: Housing Temperature Range: 0°C to 60°C ADC Resolution: 16bit Timing resolution: 10ns Weight: 730g CAN-Output: Kvaser Pressure Input Signal: -10 to +10 V Trigger Input Signal: -10 to +10 V Power Supply Voltage: 11 to 30 VDC, 30 W Connectors and Wires USB Connectivity: ASU05SB Pricing
connectors. This robust design makes it resistant to vibration and high-temperatures. It features realtime dynamic pressure measurement of combustion or port pressure in spark-ignition or
compression ignition engines.
The cycle based pre-processed characteristics can be sent on CAN-bus in real time to be post processed in another ECU or recorded on a datalogger together with your engine and dyno data. Additional CAN-HW is necessary.
3 Inputs, shared Ground for hall type
VR sensors optional with integrated conditioner board
3600ppm encoder recommended
up to 12 Inputs, ±10V, pre-configured for XDI-CPS
100kHz per channel
1000kHz in single channel operation
3mm billet Aluminum
3D printed ABS-plastic
Optimized for Optrand Sensors, 0-5V
VR optional with integrated conditioner board
regular wall-outlet power supply with ASU connector is part of
the kit
CRK-Connector VR: ASU03SD
CAM / CRK-Connector ASU03SA
Sensor Connectors ASU03SN
integrated +5V supply, 1A total for all channels
12 sensor supply on request
Power Supply: ASU03SC
XDI-CA2 rp / billet $4,500 / $4,900
XDI-CA4 rp / billet $5,500 / $5,900
XDI-CA8 rp / billet $8,800 / $9,500
XDI-CA10 rp / billet $9,900 / $10,600
XDI-CA12 rp / billet $10,900 / $11,700
Combustion Analyzer XDI-CAx
Some of the signals that can be analyzed:
- Peak Pressure and Angle of Peak Pressure
- Knock Peak Pressure, Knock Index (based on Cyl. Pressure or based on Knock Sensor, or both)
- IMEP, indicated Torque & Power per cylinder
- CA50, Heat Release Rate, COV etc.
- Actual Start of Injection (e.g. Current Probe on Injector)
- Actual Ignition Timing (e.g. Current Probe on Coil Supply)
- Intake / Exhaust Port Press. (e.g. Reversion, Scavenging)
- Actual Fuel Pressure during Injection (Pulsations)
-
APPLICATION
2-12ch, CAN-output
